1 views collected around this technical thread.
This article explains Quality of Service (QoS) concepts, benefits, common metrics, service models, deployment strategies, and provides detailed configuration examples for Huawei, Cisco, and Juniper routers to manage network traffic effectively in enterprise networks.
This guide explains how to configure static routes and precise subnet masks so that computers on different subnets and behind separate routers can communicate with each other, covering single‑router, dual‑router, and multi‑router scenarios and the concept of route aggregation.
This article explains the purpose and binary composition of IPv4 addresses, details class A‑E ranges, private address blocks, subnet masks, and provides step‑by‑step router configuration commands to establish network connectivity.
This guide explains the concepts of routing tables, static and default routes, and provides step‑by‑step Cisco router configuration commands and verification procedures to achieve full network connectivity between two routers and their attached PCs.
This guide explains how to set up NAT server and NAT outbound on a Huawei router so that internal users can access a server via the router's WAN IP on port 80 and external users can reach the same server using port 8089, including required ACL and interface configurations.
This guide demonstrates how to configure interfaces and static routes on three Cisco routers (R1, R2, R3) using CLI commands, assign IP addresses, enable interfaces, and verify the routing table, providing a step‑by‑step example of basic network routing setup.
This guide demonstrates how to configure NAT with an ACL, set up internal and external interface IP addresses, define a default static route, and create an ACL‑based traffic policy to block specific internal hosts from accessing a given external IP address.
This article lists and explains ten Cisco IOS service subcommands—including service dhcp, service linenumber, service password-encryption, service nagle, and others—detailing their functions, typical usage scenarios, and security considerations for configuring routers and switches.
This guide demonstrates how to create Huawei router ACLs and traffic policies that deny traffic from a given IP subnet and block TCP ports 25, 110, and 80, applying the policies inbound on a GigabitEthernet interface.